Skip to main content
Home  /  Waste Chute Management

Waste chutes, cleaned from the inside out

We send a 360° spinning pressure-washing head down your rubbish and recycling chutes, degrease and kill mould from top to bottom, then clean the hopper door on every level and the chute room below.

Rubbish chutesRecycling chutesHopper doorsBin roomsDegrease + mould kill
360°Spinning spray head
EveryLevel's hopper doors
2-in-1Rubbish & recycling
FreeInspection & quote
Why it matters

What's growing inside your chute?

Every bag that drops leaves residue behind. Over months it builds into a sticky, smelly layer that no one can see, but everyone can smell.

01

Bad odours

Rotting food and liquid residue coat the chute walls and push smells into corridors on every level.

02

Pests & vermin

Food build-up attracts cockroaches, flies and rodents that travel between floors.

03

Mould & bacteria

Dark, damp chutes are ideal for mould and germs, a hygiene risk for residents and staff.

04

Fire risk

Grease and residue build-up on chute walls is combustible. Regular cleaning reduces the fuel load.

05

Blockages

Sticky residue catches rubbish and leads to jams, overflowing hoppers and call-outs.

06

Resident complaints

A clean, fresh chute system is one of the most noticed improvements in any building.

Our process

How we clean a chute from top to bottom

A complete chute system clean, from the top of the chute to the chute room below.

See-Through technician holding the spinning chute cleaning head beside the service van and hot-water rigSee-Through crew pressure washing a commercial refuse room floor with a surface cleaner
01

Site prep & safety

We coordinate with building management, place signage, lock off hopper doors and clear the chute room.

02

Spinning head goes in

A 360° rotating high-pressure head is lowered down the chute, blasting the walls from the top level to the bottom.

03

Hot-water degrease

Degreaser and hot water break down built-up grease, food residue and grime.

04

Mould killer & sanitiser

An anti-mould treatment and sanitiser kill bacteria and mould, followed by a deodoriser.

05

Every door, every level

Rubbish and recycling hopper doors, frames and handles are cleaned on each floor.

06

Chute room finish

The discharge area and bin room are pressure washed, bins returned and photos supplied.

See it in action

Watch a chute clean

The spinning head in action inside a real waste chute.

What we clean

The complete chute system

Not just the tube: every part residents touch and smell.

01

Rubbish chutes

Full-height internal clean of the general waste chute, top to bottom.

02

Recycling chutes

Separate recycling chutes cleaned with the same spinning-head process.

03

Hopper doors, every level

Entrance doors, frames, seals and handles cleaned and sanitised on every floor.

04

Chute discharge & compactor

The discharge point and surrounding area at the base of the chute.

05

Bin & refuse rooms

Floors and walls pressure washed, degreased and sanitised.

06

Deodorising

A final deodorising treatment leaves the system smelling fresh.

Before & after

Chute & bin room transformations

Real bin room jobs by our team. Hover or tap each card to flip from before to after.

Garbage chute hopper door before cleaningBefore
Garbage chute hopper door · hover or tap to flip ↻
Garbage chute hopper door after cleaningAfter
Garbage chute hopper door · degreased & sanitised
Inside a rubbish chute before cleaningBefore
Inside the rubbish chute · hover or tap to flip ↻
Inside a rubbish chute after cleaningAfter
Inside the rubbish chute · spinning-head clean
Chute discharge room before cleaningBefore
Chute discharge room · hover or tap to flip ↻
Chute discharge room after cleaningAfter
Chute discharge room · pressure washed & sanitised
Our equipment

Built for high-rise waste systems

Mobile rigs with water on board and hot-water units, no disruption to building services.

Chute room pressure washing

Chute room pressure washing

Surface cleaners and hot water lift grime from refuse room floors.

Hot water cleaning rig

Hot-water rigs

Hot water and degreasers break down grease and food residue fast.

See-Through service vehicle

Fully equipped vehicles

Everything we need arrives with us: chute heads, hoses and chemicals.

Who we work with

For buildings with chutes

Apartment buildingsStrata & body corporateBuilding managersStudent accommodationHotels & serviced apartmentsAged care & hospitalsMixed-use towers
FAQ

Waste chute questions

What building and strata managers ask us most.

Planning a chute clean?

We'll help with resident notices and timing.

Call 0450 149 494
How often should waste chutes be cleaned?

Most buildings benefit from a full chute clean every 3–6 months. High-occupancy buildings, or chutes with odour or pest problems, may need it more often.

How does the spinning head work?

A rotating high-pressure head is lowered down the inside of the chute. It sprays 360° as it travels, so every part of the chute wall is cleaned from the top level to the bottom.

Do you clean the recycling chute as well?

Yes. We clean both rubbish and recycling chutes, plus the hopper doors on every level and the chute room.

Will residents be disrupted?

The chutes are out of use only while we work. We coordinate timing with building management and can provide notices for residents.

What products do you use?

A degreaser to break down built-up residue, a mould killer and sanitiser to kill bacteria, and a deodoriser to leave the system fresh.

Do we get proof of the clean?

Yes, we can supply before and after photos for your building records.

Free quote

Fresh, odour-free chutes for your building

Tell us a little about your site and we'll get back to you with a tailored quote. Prefer to talk? Give us a call.

Office90 Morack Rd, Vermont VIC

Request your free quote

We usually respond within one business day.